HANGING PHOTOS & POSTCARDS - Woodchip WALLPAPER or plaster
PhotoGAEKKO – The self-adhesive picture hanger for photos & postcards
With our picture hangers for photos or postcards you can easily and quickly mount your pictures on walls with plaster or woodchip wallpaper.
See the benefits on our product page or our instruction below:
Today we put photos or postcards on the wall with woodchip wallpaper or plaster
Our picture hanger for photos and postcards uses a high-quality adhesive point to be held on the wall. This adhesive point can be adapted to the wall surface: Depending on the sensitivity, the adhesive force of the adhesive point can be reduced by half by touching the adhesive surface once with your finger.
Important for sensitive wall surfaces:
If you have a sensitive wall surface, you can feel your way with the adhesive force and reduce the adhesive force by half: Simply touch the adhesive surface with your finger. Try to see if the adhesive strength is sufficient, otherwise you will use a different adhesive point.
Mount the photo hangers on the top left and bottom right of your photo. Note: The adhesive point is already attached to the back of the picture hanger. On the other side of the picture hanger is the slot where the photo will be held later.
Now go with the photo and the attached picture hangers to the place on your wall where the photo should hang.
Important: Do not pull!
Please remove the photo and turn the picture hanger on the wall by 365 angular degree. If the adhesive point continues to stick to the wall, please roll it up with your finger from top to bottom. This is the only way to remove the glue point without damaging your wall.
YOUR WALL READY TO HANG UP?
Suitable for many wall surfaces
The hanger is suitable for many wall surfaces, if stability and texture of your wall has been taken into account: For example: fiberglass wallpaper/glass fabric wallpaper, rough fiber/rough fiber wallpaper, non-woven wallpaper/paper wallpaper/pattern wallpaper/textured wallpaper, vinyl wallpaper/plastic wallpaper, Coating plasters/synthetic resin plasters, limestone, gypsum fibre boards, wood, concrete, plaster, tiles and various plastic surfaces.
Stability:
Your wall plays a big role in hanging the picture: Your picture is hanging on it! Your wall should be able to hold your image in terms of stability and surface.
Type: Surface
Even if our hanger with the pre-assembled adhesive tape holds your picture to the wall, it may be that your wall surface will subside and both will fall off. To avoid this, be sure that your wall surface keeps what it promises! Put on our small nails here! This keeps your image, protects your wall surface and avoids crashes! If you remove the hanger later, take a little mortar, paint or wall surface and cover the small holes.No problem! The holes are no longer visible!
Type: Color
Type: Unevenness
With small bumps ( 0.5 mm) on the wall surface, you can glue your hanger and expect a maximum load capacity of 2 kg. For coarse unevenness (> 0.5 mm) on the wall surface, gluing is not useful and it can not be expected with the entire load capacity (max 2 kg): Although the hanger is equipped with a foam for correcting unevenness, However, it only corrects small irregularities. For coarse unevenness, we recommend using the supplied nails (eg roughened fiber) or screws and dowels (eg concrete) to fix the hanger clean on your wall. This gives you the full load capacity (max 4 kg) and your picture is stable even on walls with structure. If you remove your picture hanger later, you can close the small holes with ready-made spatula from the hardware store. Nothing more visible!
Weight of your image
Each hanger has high stability due to the design and production process. If your picture weighs less than 2 kg, you can glue the hangers to the wall, because the adhesive tape of the hanger can have a load capacity of max. However, to achieve this load capacity, please note our instructions regarding your wall. If your picture weighs more than 2 kg, we recommend you to attach the hanger to the wall with the nails or screws & dowels included in the set.
Important information for you & your image
Check wall hangers & image modules regularly
If you glue, nail or screw the wall hanger, please check the load capacity of the hanger at regular intervals (at least 1 time a month):
You can do this, among other things, by checking the hold of the hanger with regard to its adhesion, nails, screws and dowels: If the hanger already detaches to part or if it loses the hold on the wall, we recommend changing the fastening material, This gives you the optimal hold for your image. Unfortunately, it is not always clear to the end user whether the wall is also suitable for gluing, nailing or screwing (see above stability and condition of your wall).
In sensitive areas the hanger nailing or screws instead of gluing
By sensitive places we mean in the area of beds and whereabouts of people and animals, fragile objects or easily destructible surfaces. For sensitive areas, we recommend attaching the hanger to your wall with the supplied nails or screws as well as plugs and dispensing with the adhesive tape. Due to correct attachment with nails or screws as well as dowels, your image sits perfectly on the wall. Please estimate the possibility of using the hanger yourself, and play it safe before humans, animals or objects are harmed. In addition, our nails and screws leave only minimal damage to the wall.
Not suitable for children under 3 years
Write us an email at support@gaekko.de and we will process your request within 24 hours.
